Home
507.238.9051 507.238.9998 fax Email

Options/Features: Model 9027 Hydraulic Drive Heat and Compressor/Condenser

Model 9027 CondenserOPTIONS:

  • Air Conditioning (R134a) and/or Hydraulic Oil Heat
  • 12 Volt or 24 Volt
  • Gallon configurations are 6-10, 11-15, 16-20, 21-25, 26-30, 31-35 GPM
  • Brackets for vertical mounting

FEATURES:

  • Housing is made of 7 gauge through 3/8 thick steel with black powder coated finish
  • Shielding is made of 18 gauge stainless steel
  • Single mounting style with standard horizontal positioning of the whole unit
  • Uses belt drive system with bolt adjustment of belt tightening
  • Uses all around shielding from moving parts
  • Air Conditioning Unit includes compressor, condenser, drier, and binary switch
  • Hydraulic Unit includes pump, motor, relief valve, and heat developer block
  • Connections on unit: A/C = #6 (Drier) and #10 (Compressor) male O-ring, Hydraulic
  • Motor = #12 female Boss O-ring (2), Hydraulic Heat = #8 JIC male (2)
  • Air Flow = 1200 CFM
  • Weight = 140 LBS (A/C and Heat unit), 104 LBS (A/C only)

Wire diagram

IMPORTANT!!! Kenway is not responsible for the vehicle hydraulic system modifications. Use only a trained hydraulic technician. 

Wire schematic