Kenway Engineering


	>> email us

Home
Quality Control
What's New
About Kenway
Products
Maps
Contact Us
Owners Manuals

First Name:
Last Name:
Company:
Address:
City
State:
Zip:
Phone:
Fax:
Email:
Hydraulic Application Information: In order to provide you with detailed technical information it is important that the following fields be filled in as complete as possible. Also, additional information on the application can be added in the note section.
Machine:
Make:
Model:
Year:
Voltage:
Hydraulic Power Supply Circuit:
Type of Hydraulic Circuit:
If in series - Additional Components in Circuit:
If in parallel - Pressure and/or Flow Control
Does the pressure and flow vary with engine speed:
What is current min. and max. flow of circuit:	Min GPM Max GPM
What is current min. and max. operating pressure:	Min PSI Max PSI
If in series - What are the circuit limitations of the other components:
Other Comments:

Hydraulic Unit:
Kenway Model:

Kenway Motor:
Note: Hydraulic Motor Part numbers without decimal places have typical GPM range in part # (i.e. 171-0610-1 is typically 6 ? 10 gpm) and are Commercial Shearing motors which are being phased out. Part numbers with decimal places show the cubic inch displacement per revolution of the motor (i.e. 171-.879-1 has .879 CID)